Filter
Top Products
31
Chapter 2 - Quick Start
MT5634ZLX/FE
Packet Driver Installation
1. Run the INSTALL.EXE file in the driver diskette (A:\INSTALL).
2. Select Packet Driver from the menu screen.
3. Check the card settings. If current settings are correct, select Start Installation and go to
step 5. Otherwise, select Modify Parameters to change settings.
4. Select the appropriate values then click Enter. When you are finished, click OK to exit.
5. The installation program starts installing drivers and modifying AUTOEXEC.BAT. Select Yes
then click Enter to modify the files.
6. Reboot the computer to load the driver.
Windows for Workgroups 3.11 Installation
1. Run INSTALL.EXE from the root directory of MT5634ZLX/FE Driver disk.
2. Select Windows for Workgroup in the Network Operating System screen.
3. If current settings are accepted, select Start Installation and go to step 13. Otherwise,
select Modify Parameters to make modifications.
4. Move the cursor to the setting you want to make a change for then click Enter to select a fit
value. When the configuration is accepted, click Enter on the OK field to exit the screen and
go back to step 3.
5. Select NDIS Server (LAN Manager,...) as the network server that you will attach to, then
click Enter.
6. The installation program starts installing drivers and modifying AUTOEXEC.BAT. Select Yes
then click Enter to modify the files.
7. Run Windows for Workgroups and click the Network Setup icon in the Network group.
8. In the Network Settings dialog box, click the Networks... button to select the network
operating system.
9. In the Networks dialog box, check the Install Microsoft Windows Network option and the
No Additional Network option. Click OK to return to the Network Settings screen.
10. Click the Drivers... button to select network driver.
11. From the Network Drivers dialog box, click the Add Adapter... button to enter the Add
Network Adapter dialog box. Select Unlisted or Updated Network Adapter and click OK.
12. Windows will display the Install Driver dialog box. Insert the driver diskette into the floppy
drive and click OK.
13. Select Enhanced mode NDIS3 for.... then click OK.
14. Follow Windows instructions to complete the installation and exit Windows.
15. Reboot the computer to run with WFW 3.11.