Filter
Top Products
44
MultiMobile User Guide
MT5634ZLX/FE
S30= 0 - 90 000 Inactivity timer. S30 sets length of time, in minutes, that the modem
counts when there is no data flow in or out the DTE serial port. A
connection is disengaged when the counter reaches the preset
value. Set S30 =0 to disable inactivity timer. For buffer mode only.
S36= 0-7 007 Negotiation fallback options:
0, 2 Hang up
1, 3 Fall back to an async connection
4, 6 Attempt MNP mode. If MNP fails, hang up.
5, 7 Attempt MNP mode. If MNP fails, fallback to async
connection.
S37= 0-19 000 S37 sets the desired DCE speed (line speed):
0 Maximum modem speed
2 Attempt 1200/75 bps connection
3 Attempt to a 300 bps connection
5 Attempt to a 1200 bps connection
6 Attempt to a 2400 bps connection
7 Attempt to a 4800 bps connection
8 Attempt to a 7200 bps connection
9 Attempt to a 9600 bps connection
10 Attempt to a 12000 bps connection
11 Attempt to a 14400 bps connection
12 Attempt to a 16800 bps connection
13 Attempt to a 19200 bps connection
14 Attempt to a 21600 bps connection
15 Attempt to a 24000 bps connection
16 Attempt to a 26400 bps connection
17 Attempt to a 28800 bps connection
18 Attempt to a 31200 bps connection
19 Attempt to a 33600 bps connection
S38= 0-23 001 Sets “downstream” data rate where K56flex provides rates of
32,000 to 56,000 in 2,000 bps increments, V.90 provides rates of
28,000 to 56,000 bps in increments of 1,333 bps.
0 = V.90 disabled
1 = V.90 autorate K56flex rates
2 = 28,000 bps 2 = 32,000 bps
3 = 29,333 bps 3 = 34,000 bps
4 = 30,666 bps 4 = 36,000 bps
5 = 32,000 bps 5 = 38,000 bps
6 = 33,333 bps 6 = 40,000 bps
7 = 34,666 bps 7 = 42,000 bps
8 = 36,000 bps 8 = 44,000 bps
9 = 37,333 bps 9 = 46,000 bps
10 = 38,666 bps 10 = 48,000 bps
11 = 40,000 bps 11 = 50,000 bps
12 = 41,333 bps 12 = 52,000 bps
13 = 42,666 bps 13 = 54,000 bps
14 = 44,000 bps 14 = 56,000 bps
15 = 45,333 bps
16 = 46,666 bps
17 = 48,000 bps
18 = 49,333 bps
19 = 50,666 bps
20 = 52,000 bps