Filter
Top Products
Chapter – Networking Basics
Multi-Tech Systems, Inc. Wireless Network Adapter User Guide 42
Configuring a Dynamic IP Address
When the drivers were installed, the default for the IP Address was set to obtain IP
dynamically through a DHCP server.
If you need to check or change the settings, complete the following steps:
1. Select Start > Settings > Control Panel.
2. Double-click on Network.
3. The Network dialog box displays. Highlight TCP/IP for USB 11Mbps Wireless
Network, and then click the Properties button.
Note: If TCP/IP is not present see the section on How to Install TCP/IP.