Filter
Top Products
English
112 7. PRACTICAL SETUP
630LT-GR Settings
The 630LT-GR’s default setting is set to enable DHCP Options. There is no need for
extra settings. After initial setup, confirm the following:
• [Use P
PP connection or another network adapter]in the [Network] tab of “Terminal
Properties” is selected.
• Press “DHCP Option” on “Network” tab in the “Terminal Properties”. “DHCP
Options” is displayed.
[Enable DHCP Option] is selected, and code numbers assigned for the DHCP
options.
After completing the above, the 630LT-GR will automatically receive information such
as an IP address from the DHCP Server every time the unit is turned on.
NOTE
• If the DHCP Option is used to setup the 630LT-GR for the first time, “Terminal
Connection Manager” will appear because the unit automatically receives
information from the DHCP Server. (“WBT Setup Wizard will not be displayed.)
• If the DHCP Option is set once and needs to be canceled, please change the key of
the DHCP Server. Even if changing the DHCP Option in the 630LT-GR, the DHCP
Server will overwrite the option next time the unit is restarted, and the changes in
the 630LT-GR will not be effective.