Filter
Top Products
English
6. USING THE TERMINAL PROPERTIES
89
Modifying the settings
This enables to delete printer settings when a printer is connected to the LPT1 port or
COM1 port.
1. Select LPT1 or COM1, and then click [Properties...].
2. “Printer Properties” dialog box is displayed.
Change the settings as needed.
[F
riendly Name]..................Changes the printer's name. (If you are naming the
printer, the name combination must be 31 character or
less.)
• When your printer is listed
[M
anufactures] / [Printers]
...................................Select the manufacturer and model of your printer.
• When your printer is not listed
[U
ser Defined].....................Click the check box.
[Model Name] ....................Type the model and manufacturer of your printer.
[Make this the d
efault printer]
...................................Sets/cancels setting the printer as a default. (The
630LT-GR corresponds to only LPT1 port, and only
one printer at a time can be installed. The installed
printer will be always the default printer.)
Click [OK] to return to the “Terminal Properties” dialog box.
Click [OK] in the “Terminal Properties” dialog box to save the settings and close the
“Terminal Properties” dialog box.