Filter
Top Products
Chapter 3 Configuring and Testing
© National Instruments Corporation 3-5 SCXI-1141/1142/1143 User Manual
4. Select the channel(s) you want to verify. You can select a block of
channels by holding down the <Shift> key or multiple channels by
holding down the <Ctrl> key. Click OK.
5. Enter the appropriate information on the Settings and Device tab.
6. Click the Test button.
7. Click the Start button.
8. After you have completed verifying the channels, click the Stop
button.
You have now verified the SCXI-1141/1142/1143 configuration and signal
connection.
Note For more information on how to further configure the SCXI-1141/1142/1143, or
how to use LabVIEW to configure the module and take measurements, refer to Chapter 4,
Theory of Operation.