Filter
Top Products
Chapter 3 VirtualBench-Logger
©
National Instruments Corporation 3-5 Getting Started with VirtualBench
g. Click on OK in the Logger Settings dialog box to return to the
front panel.
3. Select the channels that you want to display on the strip chart using
the Channel Select Control.
4. Use the right and left Y-axis Controls to select the display channels
Y scale to display on the strip chart.
5. Click on Start in the Data Acquisition Controls area. The
VirtualBench-Logger begins acquiring data at one-second intervals
and displays it on the strip chart. If no data displays, check the
signal connections to your DAQ device or check the Range Limits
for the channels you selected in the Logger Settings dialog box.
6. Click on the Stop button to stop the acquisition.
Note: Please refer to the VirtualBench-Logger Online Help for additional help on
configuring VirtualBench-Logger for your specific application.
06Chap03.fm Page 5 Friday, February 28, 1997 3:21 PM