NEC lcd projector Projector User Manual


 
117
6. Using On-Screen Menu
Using Software Keyboard to enter an encryption key
1. Select one of [KEY 1], [KEY 2], [KEY 3] and [KEY 4] and press the ENTER button.
The software keyboard will be displayed.
2. Use the SELECT

button to select one key and press the ENTER button.
3. After finishing entering the WEP key, use the SELECT

button to select [OK] and press the EN-
TER button.
The software keyboard will disappear.
When [WPA-PSK], [WPA-EAP], [WPA2-PSK] or [WPA2-EAP] is selected in [SECURITY TYPE]:
ENCRYPTION TYPE: Select [TKIP] or [AES].
KEY: Enter encryption key. Key length must be eight or greater and 63 or less.
[AUTHENTICATION] (required for wireless only)
Setting is required for using WPA-EAP or WPA2-EAP. For setting, refer to “WPA Setting Guide” on the supplied
User’s Manual CD-ROM.
[DOMAIN]
HOST NAME ..........Type in a hostname. Up to 15 alphanumeric characters can be used.
DOMAIN NAME ...... Type in domain name of the network connected to the projector. Up to 60 alphanumeric characters can be
used.