NEC lcd projector Projector User Manual


  Open as PDF
of 183
 
161
9. Appendix
3. Slowly remove the dummy case or the current attached USB Wireless LAN Unit.
LAMP
STATUS
POWER
ON/STAND BY
SOURCE
AUTO ADJUST
3D REFORM
SELECT
USB
WIRELESS
WIRELESS
WIRELESS
WIRELESS
Attaching the USB Wireless LAN Unit
A Phillips-head screw driver is needed.
1. Slowly remove the dummy case or the Wireless LAN module from the joint module. (if using the optional
USB Wireless LAN Unit)
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
2. Slowly insert the USB Wireless LAN module into the joint module. (if using the optional USB Wireless
LAN Unit)
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
3. Insert the USB Wireless LAN Unit slowly into the USB port on the rear panel of the projector.
NOTE: After inserting, make sure the bottom of the USB Wireless LAN unit is firmly seated against the cabinet.
LAMP
STATUS
POWER
ON/STAND BY
SOURCE
AUTO ADJUST
3D REFORM
SELECT
USB
WIRELESS
WIRELESS
WIRELESS
WIRELESS
 previous next