Filter
Top Products
85
6. Using On-Screen Menu
Menu Descriptions & Functions [SOURCE]
COMPUTER 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE:
• When the component input signal is connected to the COMPUTER 1, COMPUTER 2 or COMPUTER 3, select [COMPUTER 1],
[COMPUTER 2] or [COMPUTER 3] respectively.
• An optional component cable (Component V or ADP-CV1E cable) is needed for a component signal.
COMPUTER 3 (RGB Digital)
Selects the computer connected to your COMPUTER 3 (DVI-D) connector.
COMPONENT
Selects what is connected to your COMPONENT IN (Y, Cb/Pb, Cr/Pr).
VIDEO
Selects what is connected to your VIDEO input-VCR, laser disc player, DVD player or document camera.
S-VIDEO
Selects what is connected to your S-VIDEO input-VCR, DVD player, or laser disc player.
NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or
S-Video source.
VIEWER
This feature enables you to make presentations using a USB memory that contains captured images and slides
created with the ArcSoft MediaImpression for NEC contained on the CD-ROM. See the supplied NEC Wired and
Wireless Network Setup Guide for installing the ArcSoft MediaImpression for NEC.
(
→
page 65)
NETWORK
Selects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit.
When a source connected on a network is not made settings, the [NETWORK] menu will be displayed. (
→
page
110)
ENTRY LIST
Displays a list of signals. See the following pages.