Filter
Top Products
71
THUMBNAILS menu
The THUMBNAILS menu will appear when you press the MENU button on the remote control or the projector
cabinet. To close the THUMBNAILS menu, press the EXIT button.
The THUMBNAILS menu includes the following commands:
PLAY .................. Plays back automatically or manually depending on the setting in Options. This allows you to move on to
the next slide when [MANUAL] is selected in the [PLAY MODE].
LOGO ................. Replace the default background logo with another logo in JPEG, BMP, non-interlaced GIF or non-inter-
laced PNG format.
OPTIONS ............Displays the Viewer setting options.
REFRESH ........... Reflects the new information in the list of folders.
CONNECT ........... Connects a shared folder to the NETWORK drive.
DISCONNECT ..... Disconnects the share folder from the NETWORK drive.
Exiting Viewer
To exit Viewer, switch to another input such as COMPUTER 1, COMPUTER 2, COMPUTER 3, COMPONENT,
VIDEO, S-VIDEO or NETWORK.
* To switch to another input, there are two ways:
• Press the COMPUTER 1, COMPUTER 2, COMPUTER 3, COMPONENT, VIDEO, S-VIDEO or NETWORK
button on the remote control.
• Press the MENU button on the remote control to display the Viewer menu. Press the MENU button again to
display the main menu and select the input from the [SOURCE] submenu.
With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is
possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the VIEWER
button.
NOTE: Even if you switch the current Viewer source to another source, the current slide is retained. When you return back to the
Viewer, you will get the slide that has been retained.
5. Using the Viewer