Filter
Top Products
83
Chapter 5 Creating Logical Drive
This chapter describes the disk array controller configuration utility "FastBuild Utility."
1. Before Using FastBuild Utility
Before using the FastBuild Utility, see the support functions and notes described below.
1-1. Support Functions
Indicating model names and capacities of HDDs
Indicating assignments of HDDs
Creating logical drive
Setting RAID level
© Setting stripe block size
© Setting fast initialization
© Setting gigabyte boundary
© Setting cache mode
Indicating setting information and status of logical drives
Deleting logical drive
Setting boot procedure at detection of error (Halt On Error)
Indicating system resource information
Split function
Split Function
The disk array controller supports the split function which can divide a single HDD into up
to two blocks. The blocks of the HDD are specified as "Extent 1" and "Extent 2." If an
arbitrary capacity is specified in creation of a logical drive, FastBuild Utility automatically
uses the split function to divide a HDD into two blocks.