Filter
Top Products
91
2-4. Define LD
If you press [2] on the Main Menu, the [Define LD Menu] screen shown below appears.
The screen allows you to create logical drives and see the information and status of
existing logical drives.
Ex: Configuration of logical drive in RAID5 by three HDDs
FastBuild (tm) Utility (c) xxxx-xxxx Promise Technology, Inc.
LD No RAID Mode Total Drv Capacity (MB) Status
LD 1 RAID 5 3 159866 Functional
LD 2 ---- ---- ------ ----
LD 3 ---- ---- ------ ----
LD 4 ---- ---- ------ ----
LD 5 ---- ---- ------ ----
LD 6 ---- ---- ------ ----
LD 7 ---- ---- ------ ----
LD 8 ---- ---- ------ ----
[ Define LD Menu ]
[↑] Up [↓] Down [ESC] Exit [Enter] Select
[ Keys Available ]
[LD No]
Indicates the number of the logical drive.
[RAID Mode]
Indicates the RAID level of the logical drive.
[Total Drv]
Indicates the number of HDDs configuring the logical drive.
[Capacity]
Indicates the logical capacity of the configured logical drive in MB.
[Status]
Indicates the status of the logical drive.
Status Description
Functional All the HDDs configuring the logical drive operate normally.
Critical
One of the HDDs configuring the logical drive is in the offline
status. Because redundancy is lost, rebuild is required as soon
as possible. If another HDD is defected in the critical state,
data cannot be recovered any more.
Rebuilding The logical drive is being rebuilt.
Off Line
More than one HDD configuring the logical drive are in the
offline status. In any offline logical drive, data processing is
disabled.