Filter
Top Products
97
3-3. Logical Drive Creation Procedure
1. Start FastBuild Utility.
2. Press the [1] key on the Main Menu to activate [View Drive Assignments].
FastBuild (tm) Utility (c) xxxx-xxxx Promise Technology, Inc.
Channel:ID Drive Model Capacity (MB) Assignment
1:Mas MAXTOR 6Y080MO 80001
Extent 1 79933 Free
2:Mas MAXTOR 6Y080MO 80001
Extent 1 79933 Free
3:Mas MAXTOR 6Y080MO 80001
Extent 1 79933 Free
4:Mas MAXTOR 6Y080MO 80001
Extent 1 79933 Free
[ View Drives Assignments ]
[↑] Up [↓] Down [ESC] Exit
[ Keys Available ]
3. Check the connection status of HDDs connected to each channel.
[Checking items]
Whether all HDDs connected to the disk array controller is recognized.
Whether the capacities of the HDDs are indicated correctly and whether all the
HDDs have the same capacity.
Whether every "Assignment" is set to "Free."
Notice
If HDDs of different capacities are connected, contact your service
representative.
If a new HDD or a HDD replaced for maintenance is connected and
"Assignment" is set to "LD x-x," contact your service representative.
4. After making sure that all the HDDs are indicated and connected correctly, press
the [Esc] key to return to the Main Menu.