Filter
Top Products
3-12
Using the BIOS Setup Utility
Power Management Setup
Parameter Default
Setting
Alternate Setting(s)
Suspend Option Suspend STF
Auto Save-to-File Enabled Disabled
Panel Brightness Auto User Defined
Suspend Warning Tone Enabled Disabled
Remote Power On Disabled Enabled
Wake Up Alarm Disabled Enabled
Resume Alarm Time
2
Off Set time in 5 min. increments when
Wake Up Alarm is set.
1
Available when power savings is set to Custom
.
2
Resume alarm time is selectable when wake up from suspend alarm is set
.
!
System Switch — Sets the Power button as a power switch or a sleep button.
!
Power Management Under AC — Specifies whether to enable power management
features when AC power is in use. When AC power is connected to your NEC
Versa system, power management is usually disabled. If you enable this parameter,
the system automatically activates the power management profile you set, even
when AC power is used.
!
Power Savings Level — Specifies one of four levels of power management.
— High Performance — provides good battery life and best performance with only
minimal power conservation Use while on the road or traveling short distances.
— Longest Life — provides best battery life, the maximum amount of power
savings, and good performance. Use while traveling long distances.
— Off — disables power management and all device timeouts. Works well in an
office environment while powering your NEC Versa with AC power.
— Custom — lets you define power management levels and specific device
timeouts according to your own needs and present environment. Custom lets
you set the following timeouts.