Filter
Top Products
June 2004 NEC Business Solutions Ltd
36 - Chapter 3 Remote Access
Doc. No. 8557 - Release 1.1
June 2004
To change the remote access default logon name and password,
continued
1 Press F8 and follow the on-screen instructions to change the password.
2 Press F10 and type
y to save your changes.
3 Press F11 to exit the Script File Generator utility.
4 End the remote access connection.
5 From the CoSession Remote Viewer Control Center window on the
support computer, confirm that the same phone book entry used to
connect to the voice messaging system in step 1 is displayed in the
“Name” field.
6 Choose “Setup” next to “Terminal type.”
7 In the CoSession Remote Viewer Setup window, type the new logon
name and password.
8 Choose “Save,” then choose “Close.”
9 To change security settings on the remaining direct.cs2 or modem.cs2
script file on the voice messaging system and the support computer,
repeat steps 1 through 16 using the phone book entry for the alternative
connection type.
If you do not already have a phone book entry set up to access the same
voice messaging system using an alternative connection type, see the
procedure, "To add a phone book entry" on page 12 to do so.
CAUTION: Avoid changing the Direct.cs2 and the Modem.cs2 script files during
the same remote access session because you may lose the ability to
access the voice messaging system application using remote access
software.