Filter
Top Products
Xen IPK Xen Mail CTI Installation Guide
Setting Up TeLANophy Chapter 6 - 73
Doc. No. 8557 - Release 1.1
June 2004
S
ECTION
3
SPECIFYING STATION
NUMBERS FOR
V
EWCALL PLUS
For ViewCall Plus to work correctly, the phone system’s station numbers
must be entered into the voice messaging system.
To specify station numbers in the voice messaging system
1 Go to line 7 on Application screen page 1.
2 In the “Station numbers” field, enter the phone system station numbers
that are connected to the voice messaging system ports.
Port station numbers Accepts the extension number of each phone system line that is connected to
a voice messaging port, in ascending order, separated by commas. If the numbers are sequential, type
a range separated by a hyphen.
APPLICATION SCREEN PAGE 1
»1. Ans 5. Ans 10:30am DAY 20-Aug-02
2. Ans 6. Dial INSERT
3. Ans 7. A/D Recording Time: 112:12
4. A/D 8. Msg System manager
E A S Y M A D E A P P L I C A T I O N Page 1 of 12
1. Site name: Organisation's name
2. Contact: Organisation's system manager Phone#: 555-555-5555
----------------------------- Calls Answered ---------------------------------
3. Total trunks/stations: 12 / 24 Calls/day: 500
4. Day calls answered: All trunks Night calls: All trunks
5. All ports busy action: Ring-until-answered
----------------------------- Access Numbers ---------------------------------
6. Trunk pilot #: 555-555-5555 # of trunks answered: 12
Alternate trunk #s: 800-555-5555
7. Port stations Pilot #: 500
Station numbers: 500-508