Filter
Top Products
June 2004 NEC Business Solutions Ltd
56 - Chapter 4 Backing Up & Restoring the System
Doc. No. 8557 - Release 1.1
June 2004
S
ECTION
7
TRANSFERRING
BACKUP FILES
With the BRFT utility, you can use either a null modem serial cable or a
modem to connect the BRFT Remote on the support computer to the BRFT
Host on the voice messaging system.
TIP: After transferring files to your support computer hard disk, copy them to an
appropriate media for off-site storage.
Direct connection requirements
• One end of a null modem serial cable must be plugged into an available serial
port on the support computer. The other end must be plugged into the serial port
on the voice messaging system board. See “About the system board” for
details.
• Confirm that SW3 dip switch #2 is set for direct connections. If necessary, shut
down the voice messaging system, set it correctly, and then restart the system.
Modem connection requirements
• A 100 percent Hayes-compatible modem must be installed on the support com-
puter. The voice messaging system comes with a 9600K baud modem installed.
• A public phone network (analogue) line must be connected to the support com-
puter’s modem. In addition, the voice messaging system’s modem must be con-
nected to an analogue extension port.