Filter
Top Products
32
3.OPERATION
Source Information
Provides and changes information for the parameters of your current
projected source.
NOTE: For other registered signals, change their parameters on the
Source Registry menu.
The menu items you can display, change or specify are as follows:
Source Name--------------- Changes a user name that has previously
been entered.
Direct Key ------------------ Assigns settings of source to each INPUT
button (1-10) with CTL.
Input Slot ------------------- Selects an input terminal for the registered
signal when you need to do due to adding
optional equipment.
Display Mode -------------- Selects the screen display mode.
Signal System-------------- Displays the signal system of the current
source such as RGB, Video, S-Video, or
Component signal.
Video System -------------- Displays the current video standard.
Sync Frequency (H/V)----- Displays the current sync frequency.
Sync Polarity (H/V) -------- Displays the current sync polarity.
Sync System --------------- Selects the detection method of the sync
signal.
Sync Termination---------- Selects the impedance of the sync signal.
Scale Mode ----------------- Enables or disables to enlarge or reduce the
image. To take effect, press and hold CTL
then press ZOOM/PAN; to cancel it, do the
same again.
Input Sig.Size -------------- Specifies the picture size of input signal.
Output Sig.Size ------------ Specifies the picture size of output signal.
Color Matrix ---------------- Selects the mode to match the output format
of an HDTV or DVD signal.
CTI Control ----------------- Turns this feature on so you can make the
color sharper.
Noise Reduction ----------- Turns this feature on so video noise can be
reduced.
Source Select Counter ---- Resets the number of times a signal is
selected for display.
Source Display Timer ----- Resets the time of signal display.
Use the CURSOR or button to select the item you want to view or
set.
(Color Transient Improvement)
Source Information Page1/3
Source Name
Direct Key
Input Slot
Display Mode
Signal System
Video System
Sync Frequency
Sync Polarity
[ ]
[Not Used ]
[INPUT A ]
[GRAPHICS ]
RGB
fH= 15.74KHz
fV= 61.23Hz
HD(+) VD(+)
Source Information Page2/3
Sync System
Sync Termination
Scale Mode
Input Sig. Size
Output Sig. Size
[Auto ]
Mix Sync
[75Ω ]
[None Scale ]
H:1024 V:768
H:1024 V:768
Source Information Page3/3
Color Matrix
CTI Control
Noise Reduction
Select Counter
Display Timer
[Defaul ]
[OFF ]
[OFF ]
0000
0000H 00M