Filter
Top Products
35
3.OPERATION
This function is used to select the detection method of the sync
signal for an RGB signal.
Use the CURSOR or button to select "AUTO", "G-SYNC",
or "TRI-SYNC" and press ENTER.
• When "AUTO" is selected, the sync type will be displayed.
• Select "AUTO" in normal operation.
On-screen display
• AUTO ---------Detects automatically a composite or HV
separate sync signal.
• G-SYNC ------ Selects sync on green signal.
• TRI-SYNC ----Selects a tri-sync signal (HDTV signal).
■ Sync System
■ Sync Termination
This functions is used to select the impedance of the sync signal.
Use the CURSOR or button to select " 75 Ω" or "Hi-Z",
then press ENTER.
NOTE: The default setting is "75 Ω".
This should be "75 Ω" for normal use. Select the "Hi-Z" when
inputting a TTL signal.
■ Scale Mode
This function is used to enable or disable to enlarge or reduce the
image.
Use the CURSOR or button to select the desired mode and
press the ENTER button. To take effect, press and hold CTL then
press ZOOM/PAN; to cancel it, do the same again.
■ Input Sig. Size
This function is used to specify the picture size of input signal.
Use the CURSOR or to adjust the horizontal size.
Use the CURSOR or to adjust the vertical size.
■ Output Sig. Size
This function is used to specify the picture size of output signal.
Use the CURSOR or to adjust the horizontal size.
Use the CURSOR or to adjust the vertical size.
■ Color Matrix
This function is used to select the mode to match the output
format of an HDTV or DVD signal.
Use the CURSOR or button to select the appropriate mode
and press the ENTER button.