Filter
Top Products
50
3.OPERATION
Display Function
Enables you to adjust various items such as the input signal size,
output signal size, output position, interlace mode and sync protect if
the image is not displayed correctly. Normally you do not need to set
these items.
1) Input Signal Size
Adjusts the size of input signal.
The CURSOR or button adjusts the horizontal size.
The CURSOR or button adjusts the vertical size.
2) Output Signal Size
Adjusts the size of output picture.
The CURSOR or button adjusts the horizontal size.
The CURSOR or button adjusts the vertical size.
3) Output Position
Adjusts the display position of output picture.
The CURSOR or button adjusts the horizontal position.
The CURSOR or button adjusts the vertical position.
4) Interlace Mode
Select the appropriate mode for an interlace signal viewing the
image. Normally select the mode preset at the factory.
5) Sync Protect
After selecting ON, adjust the bending of the top of the screen.
Normally select OFF.
To adjust, use the CURSOR or to adjust the level viewing
the screen.
To switch the top or the bottom, press the CURSOR or
button.
6) PLL Gain
Adjust so that the clock signal is stabilized.
Normally use at the factory setting value.
7) Video Filter
Normally use at the factory setting value.
Input of a high resolution signal such as an XGA or SXGA can
cause white characters to be tinted with color. If this happens, set
the filter switch to ON and then adjust the frequency by using the
CURSOR or button.
Interlace Mode
Non Std: Odd
Non Std: Odd-1
Non Std: Odd+1
Std : Odd
Std : Odd-1
Std : Odd+1
Display Function
- Sync Protect -
Sync Protect Switch [Off ]
1024(U)
1024(D)
-Display Function-
1. Input Signal Size
2. Output Signal Size
3. Output Position
4. Interlance Mode
5. Sync Protect
6. PLL Gain
7. Video Filter
Display Function
- PLL Gain -
Control Mode [Auto ]
PDA.PDB [DIV1 ]
0VCO
Display Function
- Video Filter -
Filter Switch [Off ]
8Freq.(MHz)