Filter
Top Products
HS1100 Wireless Hotspot Gateway User Manual
137
Appendix A. Console Interface
Via this port to enter the console interface for the
administrator to handle the problems and situations
occurred during operation.
1. In order to connect to the console port of HS1100,
a console, modem cable and a terminal simulation
program, such as the Hyper Terminal are needed.
2. If a Hyper Terminal is used, please set the
parameters as 9600,8,n,1.
The main console is a menu-driven text interface with dialog boxes. Please use arrow keys on the
keyboard to browse the menu and press the Enter key to make selection or confirm what you enter.
3. Once the console port of HS1100 is connected properly, the console main screen will appear automatically. If the
screen does not appear in the terminal simulation program automatically, please try to press the arrow keys, so
that the terminal simulation program will send some messages to the system, where the welcome screen or
main menu should appear. If the welcome screen or main menu of the console still does not pop up, please
check the connection of the cables and the settings of the terminal simulation program.