NetComm HS1100 Network Router User Manual


 
HS1100 Wireless Hotspot Gateway User Manual
198
2. External Network Access / User Login
If all the steps are set properly, HS1100 can be further connected to the managed network. Before connecting a
client device (e.g. laptop, PC) to HS1100’s Public LAN (LAN1/LAN2 by default), if eliminating the need for client IP
configuration is desired, the administrator can enable the “IP PnP” function to support both static and dynamic IP.
Otherwise, the client device must be set to use DHCP in TCP/IP to obtain an IP address automatically.
1. Open an Internet browser on a client device and the default User Login Page will be displayed.
2. Enter a username and password previously created in the Local User account database (e.g. “test@postfix1”
for Username and “test” for Password). Check the Remember Me box to store the username and password on
the current computer in order to automatically login to the system at next login. Then, click the Submit button.
3. The Login Successful page appearing means HS1100 has been installed and configured successfully. Now,
you are connected to the network and Internet!
4. The Remaining button on the User Login Page is for on-demand users only, where they can check their
Remaining Usage time. The notice shown as below will appear when non-on-demand users click the Remain