Filter
Top Products
HS1100 Wireless Hotspot Gateway User Manual
32
y DHCP Server Configuration
There are three methods to set the DHCP server: Disable DHCP Server, Enable DHCP Server and Enable
DHCP Relay.
1. Disable DHCP Server: Disable DHCP Server function.
2. Enable DHCP Server: Choose “Enable DHCP Sever” function and set the appropriate configuration for
the DHCP server. The fields with red asterisks are required to be filled in.
DHCP Scope: Enter the “Start IP Address” and the “End IP Address” of this DHCP block. These fields
define the IP address range that will be assigned to the Private LAN clients.
Preferred DNS Server: The primary DNS server for the DHCP.
Alternate DNS Server: The substitute DNS server for the DHCP.
Domain Name: Enter the domain name.
WINS IP Address: Enter the IP address of WINS.
Lease Time: Choose the time interval to update DHCP IP addresses automatically.
Reserved IP Address List: To reserve an IP address for a specific client device via MAC, click the hyperlink
of Reserved IP Address. Then, the setup screen of the Reserved IP Address List as shown in the following
figure will appear. Enter the related “Reserved IP Address”, “MAC”, and Description (not mandatory).
Click Apply to save the settings.