HS1100 Wireless Hotspot Gateway User Manual
196
4) Using DHCP: If you want to use DHCP, choose
“Obtain an IP address automatically” and click
OK. This is also the default setting of Windows.
Then, reboot the PC to make sure an IP address
is obtained from HS1100.
5) Using Specific IP Address: If you want to use a
specific IP address, acquire the following
information from the network administrator: the IP
Address, Subnet Mask and DNS Server address
provided by your ISP and the Gateway address of
HS1100.
If your PC has been set up completely, please inform the network administrator before proceeding to the
following steps.
5.1) Choose “Use the following IP address” and
enter the IP address, Subnet mask. If the DNS
Server field is empty, select “Using the
following DNS server addresses” and enter
the DNS Server address. Then, click OK.
5.2) Click Advanced to enter the Advanced
TCP/IP Settings window.