HS1100 Wireless Hotspot Gateway User Manual
55
y 802.1X Authentication: Enable this function and the hyperlink of Radius Client List will appear. Click the
hyperlink of Radius Client List to get into the RADIUS Client Configuration list for further configuration. In the
Radius Client Configuration table, depending on the Type to be selected (either Roaming Out or 802.1x), the
client’s IP address will be either another NAC’s IP address (Roaming Out) or wireless AP/802.1x switch’s IP
addess (802.1x). The system will handle the authentication request from these clients accordingly.
y Trans Full Name: When enabled, the ID and postfix will be transferred to the RADIUS server for authentication.
When disabled, only the ID will be transferred to the RADIUS server for authentication.
y NASID: Enter the NASID of HS1100 for the external RADIUS authentication server.
y Server IP: Enter the IP address/domain name of the RADIUS server.
y Authentication Port: Enter the authentication port for the RADIUS server and the default value is 1812.
y Accounting Port: Enter the accounting port for the RADIUS server and the default value is 1813.
y Secret Key: Enter the key for encryption and decryption.
y Accounting Service: Select this to enable or disable the “Accounting Service” for accounting capabilities.
y Authentication Protocol: There are two methods, CHAP and PAP for selection.