Filter
Top Products
22 NP2624M User Guide
YML827 Rev1
Egress: Type the port effective egress rate. The valid range is
0~1000. The unit is 100K.
0: disable rate control.
1 ~ 1000: valid rate value.
Priority: Enable or disable the port priority function. There
are two priorities (high or low) provided if port
priority is enabled.
Security: A port in security mode will be “locked” without
permission of address learning. Only the incoming
packets with SMAC already existing in the address
table can be forwarded normally. Users can disable
the port from learning any new MAC addresses, then
use the static MAC addresses screen to define a list
of MAC addresses that can use the secure port.
Enter the settings, then click Apply button to change on this page.