Filter
Top Products
NP2624M User Guide 69
YML827 Rev1
Create 802.1Q VLAN
Create an 802.1Q VLAN and add tagged /untagged member ports to it.
1. Select <Edit>.
2. VLAN Name: Type a name for the new VLAN.
3. VLAN ID: Type a VID (between 1~4094). The default is 1. There are 256 VLAN
groups available.
4. Protocol VLAN: Press the Space key to choose the protocol type.
5. Member: Press the Space key to choose a VLAN member. There are three types to
select:
a. UnTagged: This is the member port of the VLAN group and outgoing frames are
NO VLAN-Tagged frames.
b. Tagged: This is the member port of the VLAN group and outgoing frames are
VLAN-Tagged frames.
c. NO: The port is NOT member of the VLAN group.
6. Press Ctrl+A to go back to the action menu line.
7. Select <Save> to save all configured values.
NOTE: If the trunk groups exist, they will be displayed (ex: TRK1, TRK2…)
after port 26, and you can configure them if necessary.