Filter
Top Products
NP2624M User Guide 27
YML827 Rev1
2.5.6.2. Static MAC Address
When you add a static MAC address, it remains in the switch’s address table, regardless of whether
the device is physically connected to the switch. This saves the switch from having to re-learn a
device’s MAC address when the disconnected or powered-off device is active on the network again.
1. At the main menu, click Administrator >Filter Database >Static MAC Address.
2. In the MAC address box, enter the MAC address.
3. In the Port Number box, enter a port number.
4. If tag-based (IEEE 802.1Q) VLANs are set up on the switch, static addresses are
associated with individual VLANs. Type the VID (tag-based VLANs) to associate with
the MAC address.
5. Click the Add.
6. Click the “Prev 50” will list the previous 50 MAC addresses.
7. Click the “Top” will refresh the list from the first entry.
8. Click the “Next 50” will list the next 50 MAC addresses.