A SERVICE OF

logo

Open as PDF
next previous
NP2624M User Guide 57
YML827 Rev1
3. Console – Boot Loader
Each time the switch restarts, the user can get some basic information from console (use Hyper
terminal 57600 baud rate).
After switch tests are done, a 5-seconds countdown timer will prompt the user to press any key to
enter the “User Menu”.
There are five functions in the menu:
1. start kernel: Back to switch system initiation and enter login.
2. kernel update from xmodem : Use 1k X modem to update firmware.
3. kernel update from tftp: Use TFTP to update firmware.
4. set ip address: A shortcut to setup switch IP and gateway.
5. diagnose sdram: A basic SDRAM diagnosis.