Filter
Top Products
Supplemental Information
112
N150 and N300 WiFi DSL Modem Routers
Factory Settings
You can return the modem router to its factory default settings (see Return the Modem
Router to Its Factory Default Settings on page 87). The following table shows the factory
default settings.
Table 4. Factory default settings
Feature Default Behavior
Router Login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection and
port
configuration
WAN preference setting Must use DLS WAN
Use of second Ethernet port LAN
Network Address Translation (NAT) Enabled
WAN MAC address Use default hardware address
Local area
network (LAN)
LAN IP address 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
DHCP start IP address 192.168.1.2
DHCP end IP address 192.168.1.254
Wide area
network (W
AN)
W
AN MTU size 1500
Port scan and DoS protection Disabled
Respond to ping on Internet port Disabled
IGMP proxying Disabled
NAT filtering Secured
SIP ALG Enabled
FTP ALG Enabled
VPN pass-through Enabled for IPSec, PPTP, and L2TP