Filter
Top Products
Manage the Modem Router and Monitor the Traffic
88
N150 and N300 WiFi DSL Modem Routers
2. Using a straightened paper clip, press and hold the Reset button for eight seconds.
3. Release the Reset button.
The configuration is reset to factory default settings. When the reset is complete, the
modem router reboots.
This process takes about one minute.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the
reset. For example, if you are connected to the web management
interface, do not close the browser, click a link, or load a new page.
Do not turn off the modem router.
Erase the Settings
CAUTION:
This process erases all settings that you configured in the modem router.
To erase the settings:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. T
ype http://www
.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED >
Administration > Backup Settings.
The Backup Settings screen displays.