Filter
Top Products
Manage the WiFi Network Settings
52
N150 and N300 WiFi DSL Modem Routers
7. Click the Apply button.
Your settings are saved.
If you connected over WiFi to the network and you changed the SSID, you are
disconnected from the network.
8. Make sure that you can reconnect over WiFi to the network with its new settings.
If you cannot connect over WiFi, check the following:
• If your computer or WiFi device is already connected to another WiFi network in your
area, disconnect it from that WiFi network and connect it to the WiFi network that the
modem router provides. Some WiFi devices automatically connect to the first open
network without WiFi security that they discover.
• If your computer or WiFi device is trying to connect to your network with its old
settings (before you changed the settings), update the WiFi network selection in your
computer or WiFi device to match the current settings for your network.
Security Options
Note: NETGEAR recommends that you do not change your preset security settings (WPA-PSK [TKIP] +
WPA2-PASK [AES]).
If you must change the WiFi security, select one of the following WiFi security options for the modem
router’s WiFi network:
• None.
An open WiFi network that does not provide any security. Any WiFi device can join the network.
NETGEAR recommends that you do
not use an open WiFi network.
• WEP. Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption mode
that is superseded by WP
A-PSK and WP
A2-PSK. The WEP option displays only if you select Up to 54
Mbps from the Mode menu.
WEP limits the WiFi transmission speed to 54 Mbps (the modem router is capable of speeds of up 300
Mbps). For information about configuring WEP
, see Configure WEP Legacy W
iFi Security on page 54.
• WP
A2-PSK [AES]. WPA2 provides a secure connection but some older WiFi devices do not detect
WP
A2 and support only WPA. If your network includes such older devices, select WPA-PSK [TKIP] +
WPA2-PASK [AES] security.
To use this type of security, in the Passphrase field, enter a phrase of 8 to 63 characters.
T
o join the
modem router’s WiFi network, a user must enter this passphrase.
• WP
A-PSK [TKIP] + WPA2-PASK [AES]. This type of security is the default setting and enables WiFi
devices that support either WP
A or WPA2 to join the modem router’s WiFi network. If you did not
change the passphrase, the default passphrase displays. The default passphrase is printed on the
product label (see Bottom Panel Product Label on page 10).
NETGEAR recommends that you do not change the default passphrase. If you must change the
passphrase, in the Passphrase field, enter a phrase of 8 to 63 characters.
T
o join the modem router’s
WiFi network, a user must enter this passphrase.
• WP
A/WPA2 Enterprise.
This type of security requires that your WiFi network can access a RADIUS
server. For information about configuring WPA/WPA2 Enterprise, see Configure WPA/WPA2 Enterprise
WiFi Security on page 53
.
Field Description