Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Switching Information 3-25
v1.0, May, 2008
2. Click Refresh to update the information on the screen with the most current data.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you make any configuration changes, click Apply to send the updated configuration to the
switch. Configuration changes take place immediately.
CST Port Status
Use the Spanning Tree CST Port Status page to display Common Spanning Tree (CST) and
Internal Spanning Tree on a specific port on the switch.
To display the Spanning Tree CST Port Status page:
1. Click Switching > STP > Advanced > CST Port Status in the navigation tree.
2.
Port ID The port identifier for the specified port within the CST. It is made up
from the port priority and the interface number of the port.
Hello Timer Specifies the switch Hello time, which indicates the amount of time in
seconds a port waits between configuration messages. The valid range
is 1-10, and the default value is 2. The value must be less than or equal
to (Bridge Max Age / 2) – 1. The default hello time value is 2.
Figure 3-17
Table 3-16. Spanning Tree CST Port Configuration/Status Fields (continued)
Field Description