Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Getting Started 1-9
v1.0, May, 2008
• Web User Interface
• Simple Network Management Protocol (SNMP)
Each of the standards-based management methods allows you to configure and monitor the
components of the GS700TR Smart Switch software. The method you use to manage the system
depends on your network size and requirements, and on your preference.
The GS700TR Smart Switch Software Administration Manual describes how to use the Web-based
interface to manage and monitor the system.
Using the Web Interface
To access the switch by using a Web browser, the browser must meet the following software
requirements:
• HTML version 4.0, or later
• HTTP version 1.1, or later
• JavaScript™ version 1.5, or later
Use the following procedures to log on to the Web Interface:
1. Open a Web browser and enter the IP address of the switch in the Web browser address field.
2. The factory default password is password. Type the password into the field on the login
screen, and then click Login. Passwords are case sensitive.
3. After the system authenticates you, the System Information page displays.
Figure 1-6