Filter
Top Products
GS700TR Smart Switch Software Administration Manual
1-12 Getting Started
v1.0, May, 2008
Device View
The Device View is a Java
®
applet that displays the ports on the switch. This graphic provides an
alternate way to navigate to configuration and monitoring options. The graphic also provides
information about device ports, current configuration and status, table information, and feature
components.
The Device View is available from the System> Device View page.
The port coloring indicates if a port is currently active. Green indicates that the port is enabled, red
indicates that an error has occurred on the port, and blue indicates that the link is disabled.
Figure 1-9 shows the Device View of the system.
Click the port you want to view or configure to see a menu that displays statistics and
configuration options. Click the menu option to access the page that contains the configuration or
monitoring options.
Warning: Submitting changes makes them effective during the current boot session
only. You must save any changes if you want them to be retained across a
power cycle (reboot).
Note: To save configuration changes across a reboot, use the Maintenance > Save
Config > Save Configuration page. For more information, see
“Save All Applied
Changes” on page 8-1.
Figure 1-9