Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Getting Started 1-11
v1.0, May, 2008
Configuration and Monitoring Options
The panel directly under the tabs and to the right of the navigation menu displays the configuration
information or status for the page you select. On pages that contain configuration options, you can
input information into fields or select options from dropdown menus.
Each page contains access to the HTML-based help that explains the fields and configuration
options for the page. Many pages also contain command buttons.
The following command buttons are used throughout the pages in the Web interface:
Figure 1-8
Table 1-2. Common Command Buttons
Button Function
Add Click Add to update the switch with the values on a screen. If you want the switch to retain
the new values across a power cycle, you must perform a Save. Use the Maintenance >
Save Config > Save Configuration page. For more information, see
“Save All Applied
Changes” on page 8-1.
Apply Clicking the Apply button sends the updated configuration to the switch. Configuration
changes take effect immediately, but some changes are not retained across a power cycle
unless you save them to the system configuration file.
Cancel Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Delete To remove a configured item, select it and click Delete.
Refresh Clicking the Refresh button refreshes the page with the latest information from the router.
Logout Clicking the Logout button ends the session.
Folder
HTML Page