Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Switching Information 3-29
v1.0, May, 2008
2. Click Add to create a new MST which you have configured.
3. Click Delete to delete the selected MST instance. All VLANs associated with the instance are
associated with the CST.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. If you make any configuration changes, click Apply to apply the new settings to the switch.
Configuration changes take effect immediately.
MST Port Configuration
Use the Spanning Tree MST Port Configuration page to display Multiple Spanning Tree (MST) on
a specific port on the switch.
To display the Spanning Tree MST Port Status page:
1. Click Switching > STP > Advanced > MST Port Configuration in the navigation tree. The
two figures below show the left and right portions of the web page.
Root Path Cost Displays the path cost to the Designated Root for this MST instance.
Root Port Indicates the port to access the Designated Root for this MST instance.
Figure 3-20
Table 3-19. Spanning Tree MST Configuration (continued)
Field Description