Filter
Top Products
GS700TR Smart Switch Software Administration Manual
3-32 Configuring Switching Information
v1.0, May, 2008
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. Click Refresh to update the screen with the latest MST information.
4. If you make any configuration changes, click Apply to apply the new settings to the switch.
Configuration changes take effect immediately.
STP Statistics
Use the Spanning Tree Statistics page to view information about the number and type of bridge
protocol data units (BPDUs) transmitted and received on each port.
To display the Spanning Tree Statistics page:
1. Click Switching > STP > Advanced > STP Statistics in the navigation tree.
2. Click Refresh to update the screen with the latest STP statistics information.
Figure 3-23
Table 3-21. Spanning Tree Statistics Fields
Field Description
Interface Select a physical or port channel interface to view its statistics.
STP BPDUs Received Number of STP BPDUs received at the selected port.
STP BPDUs Transmitted Number of STP BPDUs transmitted from the selected port.
RSTP BPDUs Received Number of RSTP BPDUs received at the selected port.
RSTP BPDUs Transmitted Number of RSTP BPDUs transmitted from the selected port.
MSTP BPDUs Received Number of MSTP BPDUs received at the selected port.
MSTP BPDUs Transmitted Number of MSTP BPDUs transmitted from the selected port.