Filter
Top Products
GS700TR Smart Switch Software Administration Manual
3-46 Configuring Switching Information
v1.0, May, 2008
2. Click Refresh to redisplay the page with the latest information from the switch.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you configure an IGMP snooping querier, click Apply to apply the new settings to the
switch. Configuration changes take effect immediately.
IGMP Snooping Querier VLAN Configuration
Use this page to configure IGMP queriers for use with VLANs on the network.
To access this page:
1. Click Switching > Multicast > IGMP Snooping Querier > Querier VLAN Configuration
in the navigation tree.
Table 3-30. IGMP Snooping Querier Configuration Fields
Field Description
Querier Admin Mode Select the administrative mode for IGMP Snooping for the switch from
the menu. The default is Disable.
Snooping Querier Address Specify the Snooping Querier Address to be used as source address in
periodic IGMP queries. This address is used when no address is
configured on the VLAN on which the query is being sent.
IGMP Version Specify the IGMP protocol version used in periodic IGMP queries.
Query Interval Specify the time interval in seconds between periodic queries sent by
the snooping querier. The Query Interval must be a value in the range
of 1 and 1800. The default value is 60.
Querier Expiry Interval Specify the time interval in seconds after which the last querier
information is removed. The Querier Expiry Interval must be a value in
the range of 60 and 300. The default value is 60.