Filter
Top Products
GS700TR Smart Switch Software Administration Manual
3-56 Configuring Switching Information
v1.0, May, 2008
4. After you enter the MAC address and VLAN ID of the statically configured MAC address to
delete, click Delete to remove the MAC address from the port and apply the new settings to
the system. The screen refreshes, and the MAC address no longer appears in the table on the
page.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
6. If you make any changes to the page, click Apply to apply the changes to the system. If you
want the switch to retain the new values across a power cycle, you must perform a save.