Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Routing 4-15
v1.0, May, 2008
on the network, periodically refreshed to determine if an address still exists, or removed from the
cache if the entry has not been identified as a sender of an ARP packet during the course of an
ageout interval, usually specified via configuration.
Use the following web pages to configure and display ARP detail:
• “ARP Cache” on page 4-15
• “Global ARP Configuration” on page 4-16
• “ARP Entry Configuration” on page 4-17
• “ARP Entry Management” on page 4-19
ARP Cache
Use the ARP Cache page to view entries in the ARP table, a table of the remote connections most
recently seen by this switch.
To display the page:
1. Click the Routing > ARP > Basic > ARP Cache tab.
Figure 4-7
Table 4-8. Management VLAN ARP Cache Fields
Field Description
MAC Address Displays the MAC address of the device.
IP Address Displays the associated IP address of a device on a subnet attached to
one of the switch's existing routing interfaces.
Interface Shows the associated interface of the connection.