Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Quality of Service 5-5
v1.0, May, 2008
Interface Queue Configuration
Use the Interface Queue Configuration page to define what a particular queue does by configuring
switch egress queues. User-configurable parameters control the amount of bandwidth used by the
queue, the queue depth during times of congestion, and the scheduling of packet transmission from
the set of all queues on a port. Each port has its own CoS queue-related configuration.
The configuration process is simplified by allowing each CoS queue parameter to be configured
globally or per-port. A global configuration change is automatically applied to all ports in the
system.
To display the Interface Queue Configuration page:
1. Click the QoS > CoS tab, and then click the Advanced > Interface Queue Configuration
link.
Figure 5-3
Table 5-3. Interface Queue Configuration Fields
Field Description
Interface Indicates the interface to configure. Select the check box in the heading
row to apply a trust mode or rate to all interfaces. Select the check box
next to an individual port to apply a trust mode or rate to a specific
interface.
Queue ID Use the menu to select the queue to be configured.