Filter
Top Products
GS700TR Smart Switch Software Administration Manual
5-14 Configuring Quality of Service
v1.0, May, 2008
To configure the class match criteria:
1. Click the class link.
Figure 5-8
Table 5-8. Diffserv Class Configuration Fields
Field Description
Reference Class Selects a class to start referencing for criteria. If the specified class
references another class, the Reference Class match criterion
disappears from the match list to prevent you adding another class
reference, since a specified class can reference at most one other class
of the same type. Additionally, a Remove Class Reference button
appears on the screen. Click the button to remove the current class
reference.
Protocol Type Requires a packet’s layer 4 protocol to match the protocol you select. If
you select Other, enter a protocol number in the field that appears. The
valid range is 0-255.