Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Quality of Service 5-21
v1.0, May, 2008
To display the page:
1. Click the QoS > DiffServ tab and then click the Advanced > Service Configuration link.
2. To activate a policy on an interface, select the interface and the policy, and then click Apply.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. To display the list of Ports, click PORTS as shown in Figure 5-11.
5. To display the list of LAGs, click LAGS as shown in Figure 5-12.
Figure 5-11
Table 5-11. Service Configuration Fields
Field Description
Interface Selects the interface (physical, LAG, or All) to be affected from
dropdown menus. Select the check box in the heading row to configure
all interfaces with the same setting. Select the check box next to an
individual port to configure a single interface
Policy In Selects the policy to be associated with the port from a dropdown menu.
Direction Shows that the traffic direction of this service interface, which is always
In.
Operational Status Shows the operational status of this service interface, which is either Up
or Down.