Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Managing Device Security 6-5
v1.0, May, 2008
Server Configuration
Use the RADIUS Server Configuration page to view and configure various settings for the current
RADIUS server configured on the system.
To access the RADIUS Server Configuration page:
1. Click Security > Management Security, and then click the RADIUS > Server
Configuration link.
Figure 6-3
Table 6-3. RADIUS Server Configuration Fields
Field Description
Server Address Enter the IP address of the RADIUS server to add.
To modify settings for a RADIUS server that is already configured on
the switch, select the check box next to the server address.
Authentication Port Identifies the authentication port the server uses to verify the RADIUS
server authentication. The port is a UDP port, and the valid range is 0-
65535.
Secret Configured You can only enter a RADIUS secret if you select Yes from the menu.
After you add the RADIUS server, this field indicates whether the
shared secret for this server has been configured.
Secret Shared secret text string used for authenticating and encrypting all
RADIUS communications between the device and the RADIUS server.
This secret must match the RADIUS encryption.
Active Sets the selected server to the Primary or Secondary server.
Message Authenticator Enable or disable the message authenticator attribute for the selected
server.