Filter
Top Products
GS700TR Smart Switch Software Administration Manual
6-8 Managing Device Security
v1.0, May, 2008
1. Click Security > Management Security, and then click the RADIUS > Accounting Server
Configuration in the navigation tree.
2. Click Refresh to update the page with the most current information.
3. To delete a configured RADIUS Accounting server, click Delete.
Figure 6-4
Table 6-5. RADIUS Accounting Server Configuration Fields
Field Description
Accounting Server Address Enter the IP address of the RADIUS accounting server to add.
Port Identifies the authentication port the server uses to verify the RADIUS
accounting server authentication. The port is a UDP port, and the valid
range is 0-65535.
Secret Configured Indicates whether the shared secret for this server has been
configured. The Secret field is only available if you select Yes.
Secret Specifies the shared secret to use with the specified accounting server.
This field is only displayed if the user has READWRITE access.
Accounting Mode Use the menu to enable or disable the RADIUS accounting mode.