Filter
Top Products
GS700TR Smart Switch Software Administration Manual
6-24 Managing Device Security
v1.0, May, 2008
2. Click Refresh to refresh the page with the most current data from the switch.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you change the mode, click Apply to apply the new settings to the system.
Port Authentication
Use the Port Authentication page to enable and configure port access control on one or more ports.
To access the Port Authentication page:
1. Click Security > Port Authentication, and then click the Advanced > Port Authentication
link.
Table 6-17. Port Access Control—Port Configuration Fields
Field Description
Port Based Authentication
State
Select Enable or Disable 802.1X administrative mode on the switch.
The default is Disable. This feature permits port-based authentication
on the switch.
Guest VLAN Select to Enable or Disable Guest VLAN Supplicant Mode. If enabled,
when no 802.1X supplicant is authenticated on a port, the port still
provide limited network access, as determined by a guest VLAN
configured on authentication server. The default is Disable.
Note: Use the horizontal scroll bar at the bottom of the browser to view all the fields
on the Port Authentication page.
Figure 6-15 and Figure 6-16 are both images
of the Port Authentication page.