Filter
Top Products
GS700TR Smart Switch Software Administration Manual
6-32 Managing Device Security
v1.0, May, 2008
2. To delete a configured MAC Filter, select it from the menu, and then click Delete.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you make changes to the page, click Apply to apply the changes to the system.
MAC Filter Summary
Use the MAC Filter Summary page to view the MAC filters that are configured on the system.
To display the MAC Filter Summary page:
1. Click Security > Traffic Control, and then click the MAC Filter > MAC Filter Summary
link.
2. Click Refresh to update the page with the most current information.
Figure 6-19
Table 6-21. Switch Configuration Fields
Field Description
MAC Address Identifies the MAC address that is filtered.
VLAN ID The VLAN ID used with the MAC address to fully identify packets you want
filtered. You can only change this field when you have selected the “Create
Filter” option.
Source Port
Members
Shows the ports included in the inbound filter.
Destination Port
Members
Shows the ports included in the outbound filter.