Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Managing Device Security 6-37
v1.0, May, 2008
2. To display the list of Ports, click PORTS.
3. To display the list of LAGs, click LAGS.
4. To display a list of both Ports and LAGs, click ALL.
5. To go to an interface in the list, type the interface number in the Go To Interface field and
click Go.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
7. If you make changes to the page, click Apply to apply the changes to the system.
Security MAC Address
Use the Security MAC Address page to convert a dynamically learned MAC address to a statically
locked address.
To display the Security MAC Address page:
1. Click Security > Traffic Control, and then click the Port Security > Security MAC
Address link.
Max Allowed
Dynamically
Learned MAC
Sets the maximum number of dynamically learned MAC addresses on the
selected interface. Valid range is 0 to 600.
Max Allowed
Statically Locked
MAC
Sets the maximum number of statically locked MAC addresses on the selected
interface. Valid range is 0 to 20.
Enable Violation
Traps
Enables or disables the sending of new violation traps designating when a
packet with a disallowed MAC address is received on a locked port.
Table 6-26. Port Security Configuration Fields (continued)
Field Description